Concrete and Asphalt Shot Blasting Shot Blaster
Input voltage: Customize
Total power (kw): 29.3
Blast motor power (kw): 2×11kw
Type of blast motor: Special super energy efficiency
600mm Concrete Floor Blaster Concrete Shot Mark shot blaster
The SHUGONG 210MM 110V Electric Shot Blaster is an electric shot blasting machine suitable for floor treatment and flooring removal operations. With a working width of 8 inches (approximately 210 cm), it is ideal for small-scale, fine-tuning work or corner treatment. This electrically driven machine is easy to use indoors or in environments with noise and emission restrictions, and is commonly used for concrete surface cleaning, old coating removal, and pre-treatment before floor renovation.
Product data
|
Type |
600 |
|
Shot blasting wheel diameter |
200mm |
|
working width |
600mm |
|
Walking speed |
0.5-33m/min |
|
Concrete surface cleaning efficiency |
360m2/h |
|
Steel plate surface cleaning efficiency |
110-120m2/h |
|
Dust removal link pipe diameter |
150mm |
|
Recommended steel shot diameter |
1.4-1.7mm |
|
Matching dust collector |
Eight-core automatic backflush vacuum cleaner |
Product detail
Technical Features
Advantages of Shot Blasting
Compared to larger shot blasting equipment, the 210MM shot blaster is compact, mobile, and easy to operate, making it suitable for home workshops, small construction sites, or professional construction teams. Its 110V voltage design also means it can operate under standard power conditions, enhancing ease of use.
Adjustable Parameters
As a frequently used electric shot blasting machine, the maintenance cycle for the 210MM 110V Electric Shot Blaster should be determined based on the frequency of use and the working environment. Under normal operating conditions, a comprehensive inspection and maintenance should be performed every 500 hours of operation or every 3 months. If the equipment operates in harsh environments with high dust, humidity, or debris for extended periods, it is recommended to shorten this to every 250 hours or once a month to ensure the stable operation of core components.
Maintenance focuses primarily on the following aspects:
Transmission Component Lubrication:
Regularly check the lubrication status of the gearbox and bearings to ensure smooth operation. If abnormal noise or increased resistance is detected, stop the machine immediately for troubleshooting, and replenish or replace high-temperature grease if necessary.
Carbon Brush Inspection:
Carbon brushes are consumable parts in motors, with a normal service life of approximately 1000–3000 hours. It is recommended to check their wear every 500 hours. If a significant shortening of the brush length or insufficient spring pressure is found, they should be replaced promptly to avoid motor overheating or starting difficulties due to poor contact.
Commutator Cleaning:
Approximately every 250 hours of operation, use specialized tools to clean the carbon powder and oil stains from the surface of the motor commutator to prevent increased resistance from affecting current conduction efficiency
Shot Blasting System Cleaning:
After operation, promptly remove residual material from the shot blasting channel, distributor, and impeller to prevent blockage or corrosion and extend the lifespan of core components.
In addition, the following precautions should be taken during daily operation: Continuous operation time should not exceed 30 minutes at a time; in high-temperature environments, stop the machine appropriately to cool it down; avoid water ingress into the equipment or forced operation in waterlogged areas; store in a dry, ventilated place with proper dust protection.
By combining regular maintenance with on-demand inspections, not only can sudden malfunctions be effectively prevented, but the overall service life of the equipment can also be significantly extended, ensuring construction efficiency and safety.
Product use
FAQ
(1) Q: Are you a factory or trading company?
A: We are a 100% manufacturer.
(2) Q: What advantages do you have in a competitive market?
A: Our strengths include professional design, strict quality control, guaranteed delivery times, effective communication, and reasonable pricing.
(3) Q: What is your core competitiveness?
A: We value both going global and bringing in advanced technologies. Our products are designed with global markets in mind, integrating cutting-edge techniques and evolving customer needs to continuously improve performance and details. Continuous innovation and staying up-to-date is our greatest advantage.
(4) Q: What are your main products?
A: Please specify the product category you're interested in, and we will provide detailed information.
More shot blaster show
Hot Tags: Concrete and Asphalt Shot Blasting Shot Blaster, China Concrete and Asphalt Shot Blasting Shot Blaster manufacturers, suppliers, concrete sandblasting machine, conveyor blasting machine, media blasting equipment, sand blasting equipment, shot blasting machine spares manufacturers, shot blasting spares
Previous
20 Inch Shot BlasterYou Might Also Like
Send Inquiry