Roadway Mobile Shot Blasting Machine
Input voltage: 380v 3 phase 50HZ / Customized
Blast motor power (kw): 1×4kw
Driving motor power: 0.18kw
Type of blast motor: Special super energy efficiency
Roadway Mobile Shot Blasting Machine
Roadway mobile shot blasting machines are newly developed surface treatment equipment designed for concrete, asphalt, steel, and stone surfaces. By accelerating steel shots (diameter: 0.5–2.0 mm) at high speeds, they remove surface contaminants (e.g., laitance, oil residue) while creating uniform roughness-either for direct cleaning or as preparatory work for overlays . Waste is automatically collected by integrated dust extraction systems, ensuring zero pollution and residue-free surfaces without secondary cleanup .
★Abrasive Consumption: Approximately 100 kg per session; semi-ton per 10,000 m² treatment area .
★Automation: Self-propelled design eliminates manual relocation and allows instant start/stop control .
★Electrical Safety: Unauthorized personnel are prohibited from operating switches or entering control zones to prevent accidents .
★Pre-Operation Protocol: Non-staff must evacuate the work area before activation .
Core Functions
Surface Treatment:
Removes concrete laitance and impurities in a single pass.
Textures surfaces evenly to enhance adhesion for waterproofing layers or overlays .
Eco-Efficiency:
Closed-loop abrasive recycling minimizes waste.
Dry operation with no secondary resources required .
Technical Features
Feature Description
●Durability Full manganese steel construction for extended service life
●Dust Control Closed-loop system collects 100% debris; zero emissions
●User Interface Branded electrical components; intuitive control panel for simplified operation
●Power System Premium motors ensure reliability and consistent performance
●Service Support 24/7 technical assistance with rapid on-site troubleshooting
Advantages vs. Traditional Methods
●Efficiency: Processes surfaces 40% faster than manual alternatives .
●Uniformity: Achieves precise roughness (e.g., 50–100 μm on steel) without substrate damage .
●Versatility: Adjustable parameters (abrasive size, machine speed) adapt to concrete, asphalt, or steel surfaces .
Applications
●Widely deployed in highway maintenance, bridge deck preparation, airport runway anti-skid treatment, and industrial floor renovation .
Safety Compliance
Operators must wear protective gear (goggles, anti-slip shoes), and maintenance includes daily abrasive sieve checks and lubrication of drive
components to prevent failures .
Note: All technical claims are validated via industry application cases and equipment specifications .
Portable Concrete Shot Blaster Mark Line Shot Blasting
Product Data
|
No |
Product model |
Multipurpose movable type shot blasting machine (SG series 1-200) |
|
|
1 |
Shot blast unit |
Shot blasting width |
200mm |
|
Application |
Maintenance of bridge Ground floor project-based surface treatment Maintenance of highways Maintenance of municipal road Mantenance and derusting of hull surface Cleaning the rubber on airport runway Cleaning, derusting and depitching for the surface of steel structure Removal of zebra crossing Customized |
||
|
Input voltage |
380v 3 phase 50HZ / Customized |
||
|
Blast motor power (kw) |
1×4kw |
||
|
Driving motor power |
0.18kw |
||
|
Type of blast motor |
Special super energy efficiency |
||
|
Shot blast cleaning range (mm) |
200 |
||
|
Cleaning efficiency (m²/h) |
About 108 (Concrete pavement surface) |
||
|
Running speed (m/min) |
0.5-33 |
||
|
Running method |
Run automatically in horizontal direction |
||
|
Weight of Shot blast unit (kg) |
146 |
||
Hot Tags: roadway mobile shot blasting machine, China roadway mobile shot blasting machine manufacturers, suppliers, internal shot blasting, pipe blasting equipment, sandblasting equipment manufacturers, shot blasting chamber, shot blasting pipe, tumble shot blasting machine
You Might Also Like
Send Inquiry